Look What My Daughter Started

I think I've already told you I shunned chainmaille jewelry like the plague until last month when my daughter asked me to make her a beaded chainmaille bracelet she saw.  She went with me to a bead store I get to once a year and they had a  bunch of jump rings and some examples of what could be done with them.  I bought the rings hoping I could remember what the finished piece looked like when I got home.  With the help of the Internet I was able to find some free instructions.  It was so much fun putting her bracelet together I ordered more rings.  LOTS more rings.   Here are the first of my finished pieces.  I am now working on a dainty necklace and a wider bracelet.  I am hoping my customers at Cross Roads will enjoy a change in style this year!  

Click on the pictures for more information 

Something Different - Great Rice Cereal Treat Recipe

I don't normally share recipes here.  In fact, I rarely share recipes at all.  I hate cooking. To me it is a colossal waste of time for the most part.  All that planning, prep time, worrying over the pot and clean up and what you made is gone in an instant.  I'd rather be beading.

This recipe came out so well, and was so easy I just had to share it.  My doctor told me not to eat popcorn.  I absolutely love caramel corn.  I pretty much have been ignoring the doctor (which I do most of the time anyway).  My stomach dictates what I can and can not eat, not my doctor. Anyway, to eliminate some of the popcorn in my life I thought I would try putting the caramel coating on something else.  This was the result.  It doesn't taste like caramel corn, but it is a special treat all in it's own and since it only takes a few minutes in the microwave, I don't mind making it.

Caramel Rice Cereal Treats

1 stick butter

1 cup brown sugar

1/4 cup light corn syrup

1/2 teaspoon baking soda

1 teaspoon vanilla

7-8 cups crispy rice cereal

Chocolate candy wafers (optional)

In a large microwavable bowl combine the butter, sugar and corn syrup.

Microwave on high for 3 minutes, stopping to stir it at least two times.

Microwave on high for 3 more minutes without stirring.

Take out of microwave and stir in the baking soda and vanilla.  Mixture will get light and foamy.

Fold in the cereal.   You probably will not be able to coat it all at this point.  The coating hardens quickly.

Microwave on high for 20 - 30 seconds then fold the mixture some more.  

Repeat the above step until all of your cereal is coated.  

Pat into a greased pan or lay out on a cookie sheet.  It depends on if you want cut squares or just random chunks.

If you want chocolate on your treats like I do, melt about a half cup of wafers and drizzle over the candy.

Let cool and enjoy!

Note:  The cookie sheet method will result in quite a bit of "crumbs".  They're not as pretty, but they taste just as good.

I'm off to make earrings.  You all have a good day!

Sandy

Chainmaille - How It's Done

I resisted making anything with chainmail until my daughter begged me to try making her a bracelet she saw in a bead store.  I'm not sure it if was because I was afraid of trying it or that it isn't considered "frilly".  Once I figured out the pattern for hers I had to try more.  This is my first attempt at making a bracelet for my hubby.  He loves it because it is light weight.  My next attempt was with a thicker wire for a more rugged look.

Stripped Electrical Wire

I didn't have a piece of electrical wire that still had it's plastic coating on it.  I purchased this at the hardware store to use in my copper wire wrapped pieces.  It is a combination of 19 and 20 gauge wires and was rapped in a pink sheath. 

One Strand 20 G

For Don's bracelet I used the smaller 20 gauge wire.  It is easier to manipulate by hand and was easier to use while I was trying to figure out the pattern.  It is very lightweight, airy and open.  A larger gauge will result in a heavier look.

Coiled Wire

All the instructions I read talked about using steel rods and electric drills to wind the coils for chainmaille.  Lacking a steel rod and being deathly afraid of large electrical tools I did what any good crafter would do.  I used a knitting needle and hand wound the coil.  Hey - don't laugh, it worked!

Here We Go - Snip, Snip....

Hand cutting the rings with a wire cutter results in less than ideal rings, but it is how it was done for ages.  Now the pros use saws that result in perfectly aligned ends. I have some ordered, but I didn't want to wait for the FedEx guy to show up.  I was quite pleased with the results even if it was done the "old fashioned" way.

 

Snip, Snip, Snip...

This part is boring.

Hand Made Hook

I put a wire wrapped hook on the starting end so I could tell where the first loops were and I had something to hang onto while I got the chain started.  This wrapped hook is my favorite and the most sturdy of any wire wrapped hooks I've come across.

Work In Progress

It took me a long time to get the pattern established.  I will not lie.  I had to take it out and start over SEVERAL times.  This pattern is called Full Persian.  It doesn't look very complicated but it was very easy to mess it up!

Finished Bracelet

Ta - dah!   I did it!!!

Two more have been completed since and can be found on my Etsy page.  Here is a picture of the one done with the heavier wire.  Just click on it to get more info.

Attention Cookie Cutter Lovers

New LOWER SHIPPING prices on over 250 different cookie cutters!

We are gearing up for the new season at Cross Roads and the big shipment of cookie cutters just came in.  DH spent his time marking them for the store while I got them all online.  We try to keep our prices low because we know how fast the bills can add up.  So - we decided to drop Priority Mail as our main option and bought boxes to send our cutters out in 1st Class.  

Cookies are for all seasons and all reasons, so get baking!

Find them all HERE

Our Winner Is...

I'm thrilled to announce that our latests PIF giveaway winner is Kat  of Katofmanycolors on Etsy.   She has some beautiful jewelry.  Please be sure to check out her shop and her blog.  The winner was picked by Random.org and is shown above.

Kat's blog:  Katofmanycolors
Kat's Etsy page: Katofmanycolors

Only 2 Days Left To Win

I will be picking the winner of my latest bead giveaway early Wednesday morning, so if you want a chance to win, you'd better grab it now.

http://forbesfarm.blogspot.com/2010/03/giving-of-green-pif-giveaway.html#links

New Project A Success!

This project was rambling around in my mind for a while now.  You know, one of those things you want to do but just don't quite find the time to get to.  That and I was leery of doing something without written directions and ruining a good bit of copper.  Yesterday I took the plunge and it took just about the entire day.  Way too long for such a "simple" item.  At least it was simple in my mind, in reality, not so much!  I'll bet the neighbors were glad when I stopped hammering.


So - here it is






Tadah!

Fire Treated Copper Cuff 

Hope you like it!